Houdah Software Forum Archive

Qstarz BL1000ST

Member #1310
Under Big Sur, I cannot access the device through either HoudahGeo or Houdah GPS. The message is always "Device Member #585 or no MTK device".
Houdah Software
The Qstarz BL1000ST is a file-based device. It should mount like a USB drive in Finder. You'll find the log files in the SESSION/GPSLog folder on that drive.
Member #1310 original poster
Thank you, everything ok.
Member #1120
I just purchased one of these devices but unfortunately do not see this device mounted as a usb drive when I plug it in. Is there a specific driver that I should be installing? I tried the cp210x usb driver, but I received the same error as the OP posted. 

The qstarz website names  and links to houdahgps and houdahgeo as the software to use to download and convert the qstarz files on mac.
Houdah Software
The Qstarz BL1000ST is a file-based device. You should not need any driver. The device mounts like a USB drive in Finder. You'll find the log files in the SESSION/GPSLog folder on that drive. You can tust HoudahGPS to convert these files to .GPX format.

From the user manual it seems you need to power off the device before connecting it to the computer.
Member #1120
Thank you. I did eventually get the GPS to mount as a drive after turning off the device. Originally, I didn't give the device enough time to mount before I gave up and disconnected it and tried something else.

The device appears to use two different USB controllers. When turned off and connected it is STMelectronics. When turned on and connected it shows as SILaboratories. For the latter, I installed the cp210x driver from SILaboratories.

HoudahGPS recognizes the GPS when connected and turned on.
Preset: Qstarz (MTK)
Port: USB
Name: SLAB_USBtoUART (this option wasn't available before installing the driver.)

When I click the import button I get this error: 

mtk_logger: This is not a MTK based GPS ! (or is device turned off ?)

Houdah Software
You need to use it in file mode. 

Set HoudahGPS to "Convert" rather than "Import"

Then "Select Files…" and navigate to the SESSION/GPSLog folder on the "USB drive". There should be .BIN files you can select.