Clicky

emtkopan
I have the wintec 201 GPS logger. Just to try it out I used it to track my drive to my doctor's office and took a few pictures on the way. After loading the pictures onto HoudaGeo, I connected up the Wintec and downloaded. The track inspector showed information but no latitude/longitude information showed up. What do I do after this? I can't get it to do load any GPS information into the working panel aside from the track inspector. I even tried to use HoudaGPS to save the GPS information to a file which it did but it also only shows up in track inspector instead of the working panel to geotag photos. Am I doing something wrong? Thanks.
0 0
houdah
Hi!

For HoudahGeo to be able to geotag photos, their timestamps must fall within the track log you loaded. You may verify this using the track inspector.

If track timestamps and photo timestamps, you need to make sure to configure for the actual camera time zone. Please verify the clock on your camera. Did it happen to be 12 hours off?

If you still have problems, you are welcome to email me the track log as well as a sample image. I'll try to determine what the problem is.

Best,
Pierre Bernard
Houdah Software s. à r. l.
https://www.houdah.com

HoudahGeo: One-stop photo geocoding
HoudahSpot: Advanced file search utility
Tembo: Easy and effective file search
0 0
emtkopan
OK, So I just need to configure the correct time on the camera. The GPS does it automatically? Once those are configure correctly, everything will work correctly? Thanks.
0 0
houdah
Hi!

Indeed an accurate camera clock is essential.

HoudahGeo matches photos and track logs based on their respective timestamps. This will happen automatically as soon as you load both into the same project.

Best,
Pierre Bernard
Houdah Software s. à r. l.
https://www.houdah.com

HoudahGeo: One-stop photo geocoding
HoudahSpot: Advanced file search utility
Tembo: Easy and effective file search
0 0
emtkopan
I just tried it with some test shots. Thanks so much. It worked like a charm. Just curious though, how do you know how fast or slow your camera's clock is?
0 0
houdah
Hi!

You can make sure your computer's clock is accurate by keeping it synchronized to a time server.

When you return from shooting photos, you can compare the camera's clock to the computer's clock.

Best,
Pierre Bernard
Houdah Software s. à r. l.
https://www.houdah.com

HoudahGeo: One-stop photo geocoding
HoudahSpot: Advanced file search utility
Tembo: Easy and effective file search
0 0