Clicky

pa1zz
This is getting frustrating.
I bought one of the recommended devices and its still not working :-(

Accepted the fact that I would have to use windows to program settings that's ok.

But when connected with the USB cable its not mounting on the desktop. So I can't read the darn files. Its sowing in system profiler as "CP2102 USB to UART Bridge Controller" but that's it..

Now what to do ???
Smiles across the wires,


Rogier
0 0
pa1zz
I just tried it with blue tooth without any result either :-(
I can connect to the device but the file cant be read.


Smiles across the wires,


Rogier
0 0
houdah
Hi!

The Wintec WBT-201 is not supposed to mount on the desktop.

It will be accessible through HoudahGeo and HoudahGPS if you follow the instructions in the Help documentation or [URL=http://www.houdah.com/houdahGeo/faq.html#How_do_I_set_up_my_Wintec_WBT-2]FAQ[/URL]: i.e. install the USB driver or pair as a Bluetooth device.

The Help documentation will also point you to Mac software to configure settings.

Best,
Pierre Bernard
Houdah Software s. à r. l.
https://www.houdah.com

HoudahGeo: One-stop photo geocoding
HoudahSpot: Advanced file search utility
Tembo: Easy and effective file search
0 0
pa1zz
Hi Pierre,

I have looked at the mini disk that came with the device. But it contains no USB drivers for the Mac.

Do you have any suggestions where to obtain the USB driver?

My Mac Pro doesn't have a Blue-Tooth module.

Thanks!


Rogier
Smiles across the wires,


Rogier
0 0
houdah
Hi!

The [URL=http://www.houdah.com/houdahGeo/faq.html#How_do_I_set_up_my_Wintec_WBT-2]HoudahGeo FAQ[/URL] points to the drivers at [URL=https://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx]Silicon Labs[/URL].

Best,
Pierre Bernard
Houdah Software s. à r. l.
https://www.houdah.com

HoudahGeo: One-stop photo geocoding
HoudahSpot: Advanced file search utility
Tembo: Easy and effective file search
0 0